Vivo Y95 (PD1818F) FRP Bypass | Pattern Lock Remove | Factory Reset – 100% Tested
GSM Tested File presents a complete solution for Vivo Y95 (PD1818F). With our prog_emmc_firehose_8937_ddr.mbn Loader, you can bypass FRP lock, remove pattern/PIN lock, and perform factory reset easily.
Vivo Y95 (PD1818F) – FRP Bypass | Pattern Lock Remove | Factory Reset
⚠️ Important: This tutorial is only for Vivo Y95 (PD1818F) . Follow steps carefully to avoid any issue.
🔓 What Can You Unlock With This Method?
| Lock Type | Status |
|---|---|
| 🔐 FRP Lock (Google Account) | ✅ Removed |
| 🔒 Pattern Lock | ✅ Removed |
| 🔑 PIN Lock | ✅ Removed |
| 🔐 Password Lock | ✅ Removed |
| ⚙️ Factory Reset (Hard Reset) | ✅ Working |
📱 Device Information
| Brand | Vivo |
| Model | Y95 (PD1818F) |
| Chipset | Qualcomm Snapdragon |
| Loader | Prog_Firehose_DDR.elf |
| Tool Required | QFIL / QPST |
| Status | ✅ 100% Tested Working |
📥 Download Links
⬇️ Prog_Firehose_DDR Loader – Vivo Y95 (PD1818F)
🛠️ Required Tools (Download if not available):
📖 Step-by-Step Tutorial
📌 Step 1: Install Drivers
- Download and install Qualcomm USB Driver on your PC.
- Restart your computer after installation.
📌 Step 2: Put Device in EDL Mode
- Switch off your Vivo Y95 (PD1818F) completely.
- Press and hold Volume Up + Volume Down buttons together.
- Connect USB cable to PC while holding buttons.
- Device will enter EDL Mode (Black screen – PC will detect as Qualcomm HS-USB).
📌 Step 3: Open QFIL Tool
- Open QFIL (Qualcomm Flash Image Loader) as administrator.
- Go to "Select Build Type" → Choose "Flat Build".
- Click on "Browse" next to "Programmer Path".
- Select the prog_firehose_ddr.elf file you downloaded.
📌 Step 4: Load and Flash
- Click on "Load XML" (if firmware available) OR
- Click directly on "Download" button for FRP/Reset.
- Wait for the process to complete (Green tick will appear).
- Disconnect device and restart.
💡 Note: If device doesn't boot, perform a Factory Reset from recovery mode after flashing.
⚠️ Common Errors & Solutions
| Error | Solution |
|---|---|
| Sahara/Firehose Error | Reinstall Qualcomm drivers, use USB 2.0 port |
| Device Not Detected | Check Device Manager, install drivers manually |
| Loader Mismatch | Ensure you're using correct Y95(PD1818F) loader |
| Switch to EDL Failed | Use Test Point method (see video below) |
❓ Frequently Asked Questions (FAQs)
Q1: Will this remove FRP lock onVivo Y95 (PD1818F) ?
A: Yes, 100% tested and working.
Q2: Can I remove pattern lock without data loss?
A: No, this method will perform a factory reset – all data will be erased.
Q3: Is this loader free?
A: Yes, completely free for personal use.
Q4: What if my phone is dead after flashing?
A: Re-flash the stock firmware using the same loader.
Q5: Do I need to pay for unlocking?
A: No, this is a free solution. No paid tool required.
✅ After Unlocking – What You Get
- ✅ FRP (Google Account) Removed
- ✅ Pattern / PIN / Password Removed
- ✅ Factory Reset Done – Like New Phone
- ✅ Phone Ready for New Setup
📞 Need Help?
If you face any issue while unlocking your Vivo Y95 (PD1818F) , leave a comment below with:
- Error screenshot
- Tool version you are using
- Driver status
We will reply within 24 hours with a solution.
⚠️ Disclaimer: This tutorial is for educational purposes. GSM Tested File is not responsible for any damage to your device. Always backup your data before flashing.
0 Comments: