If you are searching for the official and tested SMARTi ST-111 Tab Firmware Flash File read via Chinese Miracle II (CM2 MTK), you have come to the right place. In this comprehensive guide, we provide the complete dump firmware, scatter file, and step-by-step flashing instructions to fix software-related problems on your SMARTi ST-111 Tablet PC.
Why Download SMARTi ST-111 Tab Stock Firmware?
Mobile repair technicians and users often face system errors or software corruptions on MediaTek devices. Downloading and flashing the correct factory dump file is the most reliable way to restore your SMARTi ST-111 tablet to its original factory condition.
This tested firmware file helps resolve the following issues:
- Fix Dead Boot & Bricked Tablet: Unbrick devices that fail to power on or are stuck in a hard bricked state.
- Fix Bootloop & Hanging on Logo: Repair tablets that freeze continuously on the SMARTi boot logo during startup.
- Remove Screen Lock & FRP Lock: Bypass forgotten pattern locks, PIN passwords, and Google Factory Reset Protection (FRP).
- Fix System Instability & App Crashes: Clear malware, viruses, and unexpected force-close errors caused by corrupted system files.
- Recover from Wrong Flashing: Restore the original partition layout if the device was flashed with an incompatible ROM.
Firmware File Information & Specifications
Below are the key hardware and software specifications extracted directly from the device via the CM2 MTK tool:
| Parameter | Specifications / File Details |
| Device Brand | SMARTi Tab |
| Model | ST-111 |
| Chipset / CPU | MediaTek MT6735 |
| Internal Build ID | MT6735__SMARTi__N_zl835_byc28__12__1.0__NRD90M__aeon6735_36_d_n |
| Android Version | Android 12 |
| RAM / ROM | 8 GB RAM / 512 GB Storage |
| Preloader File | preloader_aeon6735_36_d_n.bin (Size: 1.36 KB) |
| Dump File Size | ~721 MB (Compressed) |
| Read Tool | Chinese Miracle II (CM2 MTK) |
| File Status | 100% Tested & Verified Clean Dump |
Pre-Requirements Before Flashing
Before starting the flashing process, make sure your computer and device meet the following prerequisites:
- MediaTek USB Drivers: Install the latest MTK VCOM / BROM drivers on your Windows PC so the device is recognized in flash mode.
- Flashing Tool: Use SP Flash Tool (Smart Phone Flash Tool) or hardware dongles like CM2 MTK / NCK Box.
- Quality USB Cable: Use an undamaged micro-USB cable to prevent connection dropouts during the flash process.
- Battery Level: Ensure the tablet is charged to at least 50% to prevent unexpected shutdowns mid-process.
- Data Backup: Backup all personal data if accessible, as flashing will completely erase the internal storage.
How to Flash SMARTi ST-111 using SP Flash Tool or CM2
Follow these simple steps to flash your SMARTi ST-111 MediaTek tablet safely:
- Extract Firmware: Download and extract the SMARTi ST-111 firmware zip package on your computer using WinRAR or 7-Zip.
- Install Drivers: Ensure the MediaTek USB VCOM drivers are properly installed on your operating system.
- Open Flash Tool: Run
flash_tool.exeas Administrator. - Load Scatter File: Click Scatter-loading and browse to select the
MT6735_Android_scatter.txtfile from the extracted firmware folder. - Verify Preloader: Confirm that
preloader_aeon6735_36_d_n.binis checked in the file list. - Start Download: Select Download Only mode and click the Download button.
- Connect Device: Power off the SMARTi ST-111 tablet completely. Hold the Volume Down or Volume Up button and connect it to your PC via USB cable.
- Flashing Process: The flashing bar will start filling up. Wait until a green checkmark (Download OK) appears on the screen.
- Reboot Tablet: Disconnect the USB cable and turn on your device. The initial startup may take 3 to 5 minutes.
Important Safety Note: Always back up your device's original NVRAM or Security partition prior to performing a full format or re-flash to avoid losing your IMEI numbers and network connectivity settings.
0 Comments: